[FFmpeg-trac] #6357(ffplay:new): An error in decoding RTMP (h264&aac) live streaming for a long time
FFmpeg
trac at avcodec.org
Fri Apr 28 11:29:40 EEST 2017
#6357: An error in decoding RTMP (h264&aac) live streaming for a long time
-------------------------------------+-------------------------------------
Reporter: xiaoxyzero | Type: defect
Status: new | Priority: normal
Component: ffplay | Version:
Keywords: rtmp | unspecified
Blocking: | Blocked By:
Analyzed by developer: 0 | Reproduced by developer: 0
-------------------------------------+-------------------------------------
I use ffplay to play a RTMP live streaming (url is
"rtmp://live.hkstv.hk.lxdns.com/live/hks").
After 16819 seconds of receiving, the decoding function returns error,
and the error info is as follows.
I tried ffmpeg version 3.0, 3.1, 3.3, and it has the same problem. I
hope you can tell me where is wrong or how to slove this problem.
D:\ffmpeg-20170425-b4330a0-win32-static\bin>ffplay.exe
rtmp://live.hkstv.hk.lxdn
s.com/live/hks
ffplay version N-85653-gb4330a0 Copyright (c) 2003-2017 the FFmpeg
developers
built with gcc 6.3.0 (GCC)
configuration: --enable-gpl --enable-version3 --enable-cuda --enable-
cuvid --e
nable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-
avisynth --
enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-
iconv
--enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca
--enable-li
bfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-
libmodplug -
-enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb
--enabl
e-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp
--enable-li
bsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-
libtwolam
e --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-
libvpx
--enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265
--enable
-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib
libavutil 55. 61.100 / 55. 61.100
libavcodec 57. 93.100 / 57. 93.100
libavformat 57. 72.101 / 57. 72.101
libavdevice 57. 7.100 / 57. 7.100
libavfilter 6. 87.100 / 6. 87.100
libswscale 4. 7.101 / 4. 7.101
libswresample 2. 8.100 / 2. 8.100
libpostproc 54. 6.100 / 54. 6.100
Metadata: : 0.000 fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
author PowerSmart
duration 3600.00
datarate 500.00
livetime 1489071037.00
timeshift 0.00
width 640.00
height 480.00
videodatarate 0.00
framerate 25.00
videocodecid 7.00
audiosamplerate 32000.00
audiosamplesize 0.00
stereo TRUE
audiocodecid 10.00
filesize 0.00
Input #0, flv, from 'rtmp://live.hkstv.hk.lxdns.com/live/hks':0/0
Metadata:
author : PowerSmart 0KB vq= 0KB sq= 0B f=0/0
copyright :
description :
datarate : 500
livetime : 1489071037
timeshift : 0
Duration: 01:00:00.00, start: 0.000000, bitrate: N/A
Stream #0:0: Audio: aac (LC), 32000 Hz, stereo, fltp
Stream #0:1: Video: h264 (Constrained Baseline), yuv420p(progressive),
640x4
80, 25 fps, 15 tbr, 1k tbn, 30 tbc
Metadata:-V: 0.075 fd= 238 aq= 0KB vq= 0KB sq= 0B f=14/14
author PowerSmart
duration 3600.00
datarate 500.00
livetime 1489071037.00
timeshift 0.00
width 640.00
height 480.00
videodatarate 0.00
framerate 25.00
videocodecid 7.00
audiosamplerate 32000.00
audiosamplesize 0.00
stereo TRUE
audiocodecid 10.00
filesize 0.00
[h264 @ 094e5180] P sub_mb_type 13 out of range at 23 25 0B f=15/15
[h264 @ 094e5180] error while decoding MB 23 25
[h264 @ 094e5180] concealing 226 DC, 226 AC, 226 MV errors in P frame
HandleInvoke, Sanity failed. no string method in invoke packet=15/15
[flv @ 08772fe0] DTS 16808050 < 2353520185 out of order 0B f=15/15
[aac @ 09527a60] This decoder does not support parameter changes, but
PARAM_CHAN
GE side data was sent to it.
[h264 @ 087c9880] [aac @ 09527a60] mb_type 34 in P slice too large at 33
24
Error applying parameter changes.
[h264 @ 087c9880] error while decoding MB 33 24
[h264 @ 087c9880] concealing 256 DC, 256 AC, 256 MV errors in P frame
[flv @ 08772fe0] Audio codec (e) is not implemented. Update your FFmpeg
version
to the newest one from Git. If the problem still occurs, it means that
your file
has a feature which has not been implemented.
[flv @ 08772fe0] If you want to help, upload a sample of this file to
ftp://uplo
ad.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list.
(ffmpeg-devel
@ffmpeg.org)
[aac @ 09527a60] This decoder does not support parameter changes, but
PARAM_CHAN
GE side data was sent to it.
[aac @ 09527a60] Error applying parameter changes.
[aac @ 09527a60] This decoder does not support parameter changes, but
PARAM_CHAN
GE side data was sent to it.
[aac @ 09527a60] 16819.03 A-V:-2336735.363 fd= 259 aq= 1KB vq= 0KB
sq=
Error applying parameter changes.
--
Ticket URL: <https://trac.ffmpeg.org/ticket/6357>
FFmpeg <https://ffmpeg.org>
FFmpeg issue tracker
More information about the FFmpeg-trac
mailing list